Power Saver

产品说明

Saving Electricity, Protecting Power Equipment, Extending Motor's Life.

Municipal projects, government office buildings, oil refineries, oil production plants, chemical plants, steel mills, metal processing plants, mining sites, stone works, quarries, smelters, printing houses, printing and dyeing plants, textile mills, cement plants, wood processing plants, machining Plants, cement plants, brick factories, pharmaceutical factories, breweries, feed mills, cold stores, concrete factories, schools, hospitals, hotels, shopping malls, central air-conditioning power systems, and any electrical equipment with inductive loads. Particularly, "VANS TECH" Power Saver is suitable for the electrical equipment as "big horse-drawn little trolley" or any various power projects with frequent change of load and under load.

Installation and Use

ONE. Installation conditions:
1. Features
1.1 Simple operation: automatic operation and manual operation can be achieved by operating the keys.
1.2 Current discrimination: When the current is input, it is not necessary to consider the polarity automatic discrimination conversion.
1.3 Overvoltage protection: When the grid voltage exceeds the set value, the installed power saver group will be automatically, quickly, and step by step.
1.4 Low load blocking: When the current signal is less than 5% of the design capacity, the operation of the power saver will be blocked. At the same time, according to the set delay, the installed power saver group will be cut off step by step.
2. Scope of application
This product is suitable for all three-phase asynchronous motors and inductively loaded appliances.
3. Technical parameters
3.1. Working voltage: 380V±20% 50HZ
3.2. Input current: ≤5A
3.3. Rated capacity: 40K ~ 120K
3.4. Phase: three-phase
4. Using the environment
4.1. Use above sea level and below 2000 meters.
4.2. Ambient air temperature: -5 ° C ~ +40 ° C, the average value within 24 hours does not exceed +35 ° C.
4.3. Humidity: When the maximum temperature is +40 °C, the relative humidity of the air does not exceed 50%. At lower temperatures, higher relative humidity can be tolerated. For example, at a temperature of 20°C, the humidity reaches 90%.
4.4. Environment: No flammable and explosive medium, no conductive dust, no corrosive gas in the surrounding environment.
4.5. Shock vibration: The power saver should be installed and used in places where there is no significant shaking, impact or vibration.

TWO. The calculation method of electricity saving rate and payback period:
The power-saving rate is calculated according to the international power-saving definition and Chinese standards.
Under the same working conditions, the power saving rate is calculated by the percentage of the current or electric energy saved by the power saver and the current or electric energy when the power saver is not used.
Investment payback period calculation method
Payback period = original investment amount / monthly electricity savings.

THREE. After-sales service:
1. The warranty period is 12 months (from the date of installation). Any non-human damages or malfunction will be with free guidance, repair, or replacement within the warranty period.
2. Any damages with user error or human factors, our company is responsible for the low-cost paid repair or replacement.

FOUR. Use question and answer
1. Q: If the power distribution system has installed the capacitor compensation system, in this condition, will the installation of "VANS TECH"Power Saver can save electricity?
Answer: The capacitor compensation system is not in contradiction with "VANS TECH"Power Saver. The capacitor compensation system solves the problem of low system power factor. The system power factor can be improved, but the non-positive amount of hazardous energy in the system still exists. In this case, only the installation of "VANS TECH"Power Saver can correct the interference load pollution and achieve the effect of power-saving.

2. Q: The inverter is installed in the system. Is it necessary to install "VANS TECH"Power Saver?
Answer: The inverter and "VANS TECH" Power Saver is not contradictory. The frequency converter mainly solves the problem of three-phase AC motor speed regulation,  but it generates a lot of harmonic pollution, causes great interference and damage to other power equipment in the system, and shortens the equipment life. Installing "VANS TECH" Power Saver can completely solve the above problems. The two are not only contradictory, but the combination will produce better results.

3. Q: How does "VANS TECH" Power Saver save electricity? What is the power saving rate?
A: "VANS TECH" Power Saver can improve the power factor, recover the remaining energy, reduce the reactive power of the equipment itself, convert the reactive power into active power, reduce the heat and noise of the power equipment, and reduce the low voltage. The reactive load output in the network reduces the power loss and achieves the power saving effect. The practice has proved that "VANS TECH" Power Saver can save 10%-70%.

4. After installing "VANS TECH" Power Saver, will it affect the rated output power of the motor?
A: No. "VANS TECH"Power Saver can improve motor performance and increase output torque to extend the motors' life. When the motors are running, some of the electricity can be converted into kinds of useless power, such as heat, noise, vibration, etc., which are easily be wasted. The lower the load, the greater the proportion of wasted power. "VANS TECH" Power Saver eliminates the waste of electricity invalid and achieves the purpose of saving electricity.

For more info and price of Power Saver, please contact us freely, you will have instant feedback
https://www.petrolsteel.com/Power-Saver-p.html
Tel/Fax: +86 10 8599 9168
Cel/Whatsapp/Wechat: 0086 159 0035 7871
Email: sales@petrolsteel.com, jackywinn@foxmail.com

询价