产品说明
PESCO Heat exchanger is equipment widely used both upstream and downstream facilities, built for efficient heat transfer from one medium to another. Heat exchangers are classified by flow arrangement, parallel flow, and counterflow. Parallel flow (current) is the flow when two fluids enter the exchanger at the same end and travel parallel to one another to the other side. Counterflow (countercurrent) is when two fluids enter the exchanger from opposite ends.
Coolers:
Air-cooled
Cooling towers
Commonly used types:
Shell and tube
Plate
Plate fin
Air-cooled
In oil and gas facilities, the following types are commonly used:
Commonly used:
Bath heaters
Indirect
Fluid-fluid:
Shell and tube
Double pipe
Plate and frame
Uses of heat exchangers may vary depending on the process requirements, such as heat and cool fluids, heat recovery, separation, reboiling, condensing.
Shell And Tube Heat Exchanger
Shell and tube heat exchanger consists of a bundle of tubes and shells. Heat transfer occurs when one fluid that needs to be heated or cooled flows through the tubes and the second fluids runs over the tubes that provide the heat or absorbs the heat required.
Configuration
The configuration depends on each process requirements. The main consideration for the design should be fluid involved, corrosion potential, problems of cleaning, pressure drop, heat transfer efficiency, tubes usually 20 ft. and 40ft.
Basic types of shell and tube heat exchangers are Fixed Tube Sheet, Floating Head, U-Tube.
Floating Head heat exchanger
U Tube Heat Exchanger
Fixed tube heat exchanger
ONE OF THE KIND, MILLIONS OF CHOICES
SUPERIOR QUALITY
PROMPT DELIVERY
FAVORABLE FEEDBACK
ALL AVAILABLE IN PESCO
SELECT PESCO, YOU WILL BE RIGHT
For more info and price of Heat Exchanger and the specifications, please send us inquiry, you will have quick reply soon.
Headquarter: A-4F, Vantone Center, A6, Chaowai St., Chaoyang Dist., Beijing, China.
Tel/Fax: +86 10 8599 9168
Whatsapp/Wechat: 0086 159 0035 7871
Email: sales@petrolsteel.com, jackywinn@foxmail.com